Amber Nebula Grand Art Chandelier
Shipping rates and eligibility vary by product and destination. View the Shipping Policy for details.
Enjoy 10% off your order! Use code WELCOME10 at checkout
Suspended from a brushed gold ceiling canopy, hundreds of raw-cut crystal glass nuggets hang on ultra-fine steel suspension cables to form an open, sculptural circular ring suspended mid-air. Downlights integrated into the canopy illuminate the amber, clear, and smoky brown glass facets from above, casting refracted warmth and layered shadows through the opening below.
The elongated rectangular footprint and vertical drop create a floating focal point designed for high-ceiling dining tables, grand double-height foyers, open stairwells, or luxury reception lobbies where standard horizontal fixtures lack architectural height.
Amber Nebula Grand Art Chandelier Details
- Materials: Solid metal base plate with polished faceted crystal glass nuggets
- Canopy finish: Brushed gold
- Crystal palette: Amber, clear, and smoke brown
- Light source: Integrated ceiling canopy LED spotlights (included)
- Colour temperature: 3000K warm white
- Voltage: AC 110–240V (operates across standard 120V and 230V circuits)
- Suspension: 78.7″ (200cm) adjustable aircraft-grade steel cables (custom lengths available on request)
- Wiring & mounting: Hardwired; direct ceiling canopy bracket
- Control: Standard wall switch compatible (non-dimmable driver standard; dimming drivers available upon request)
- Moisture rating: IP20 damp-rated (dry and ventilated indoor spaces only; avoid wet splash zones)
Size
Dimensions reflect the rectangular ceiling canopy and the maximum overall vertical suspension height from canopy to lowest crystal.
Standard
L 47.2″ × W 15.7″ × H 78.7″
L 120cm × W 40cm × H 200cm
Large
L 59.1″ × W 15.7″ × H 98.4″
L 150cm × W 40cm × H 250cm
Grand
L 78.7″ × W 15.7″ × H 118.1″
L 200cm × W 40cm × H 300cm
Colour
FAQ
How is this chandelier shipped, and how difficult is stringing the crystal strands?
To protect against breakage and tangled lines, the crystal strands arrive pre-assembled and individually packed in numbered bags that match a corresponding coordinate chart on the ceiling canopy. The canopy is mounted and wired to the ceiling first; your installer then attaches each numbered line directly into its designated canopy hook. While straightforward, plan for 2 to 3 hours of hanging time depending on fixture size.
Does my ceiling need structural reinforcement to support this fixture?
Yes. Genuine solid crystal glass and an extended metal canopy create considerable total weight (ranging from approximately 25kg to over 55kg depending on the chosen length). Standard drywall hollow anchors or lightweight junction boxes are insufficient. The mounting plate must be anchored directly into ceiling wood joists, structural concrete, or reinforced cross-blocking installed prior to closing the drywall.
Can this chandelier fit standard 8ft or 9ft residential ceilings?
The crystal silhouette forms an open vertical loop requiring at least 150cm to 200cm (59″ to 78.7″) of vertical clearance to maintain its intended proportions. On standard 2.4m to 2.7m (8ft–9ft) ceilings, it will hang too low for open walk-through spaces. It is engineered for double-height entrances, vaulted great rooms, stairwells, or suspended directly above a low-traffic rectangular dining table with adequate eye-line clearance.
Where are the light sources located, and can the LEDs be replaced?
The illumination comes from high-efficiency LED downlight modules recessed directly inside the ceiling canopy plate, rather than wired through the individual crystal strands. These downlights project downward across the faceted crystals to generate both ambient sparkle and functional table lighting. In the rare event of driver or diode failure, the modules are accessible and serviceable inside the canopy plate without taking down the suspension lines.
How do I keep dust off the crystal facets without breaking strings?
Routine upkeep requires only a static microfiber duster or an air-duster blower passed gently between the strands to lift surface settling. For annual deep maintenance, wear soft cotton gloves and wipe individual crystal clusters lightly with a dry or slightly alcohol-dampened microfiber cloth. Never tug downward on suspension cables or spray chemical cleaners directly into the canopy electronics.
Can I shorten or customize the hanging cable height before installation?
The top suspension cables between the ceiling canopy and the main installation frame include internal spring lock mechanisms allowing precise leveling and height adjustment. However, the relative vertical drop of the crystal strands themselves determines the circular silhouette, so shortening the overall suspension moves the entire sculpture closer to the canopy rather than altering the circular pattern.
You may also like
Liora — The Hit List
Our most-loved collections, where refined elegance meets expert craftsmanship to illuminate your home with character.
Subscribe to our emails
Be the first to know about new collections and special offers.
