Solid Brass Wall Sconce – Multi-Directional Swivel Spotlight Knurled Grip Brushed Brass Living Room Art Fixture Custom

The body is brass, in two finishes: Antique Bronze and Brass. The photo shows the Antique Bronze finish, a darker, aged tone with a fine brushed grain, and a diamond-patterned, knurled texture on the rim of the wall plate and on the lower part of the head, which gives your fingers a grip when you aim the light. As a general guide, the Brass finish looks warmer and more golden than Antique Bronze. Finishes can look slightly different from a screen to your room, so please ask us for a closer description or a reference photo if an exact match to other fittings matters.

There is one standard size, ⌀ 4.1″ × W 4.7″ × H 5.9″ (about 10 × 12 × 15 cm), so it is a small, compact light. It suits a bedside wall as a reading light, a desk or a shelf, a hallway, a dark corner or a picture on the wall. How the three listed numbers relate to the plate and the head, and how far the light stands out from the wall, are not listed, so please ask us if you need them before you order.

The light source is a built-in (integrated) LED rated 6W, so there is no bulb to buy or to screw in. The colour is warm light, and the exact Kelvin value is not listed. The brightness in lumens, the beam angle and the lifespan of the LED are not listed, and replacing the LED is not listed either, so please ask us before you order, and contact us if it ever needs service rather than opening the fixture yourself. In the photo, the lens at the end of the head is frosted, which softens the light.

Yes. In the photo, the cylinder-shaped head sits on a ball joint with a small lever, on a short arm from the wall plate, so the head is made to swing and point where you need the light, for example onto a book in bed, a desk or a picture. How far it turns, whether the lever locks it in place and how stiff the joint is are not listed, so please ask us if you need to aim the light for reading. Do not force the joint.

In the photo, there is a small round knob on the face of the wall plate. What it does, for example whether it switches the light on and off or changes the brightness, is not listed. Dimming is not listed either, so please ask us before you order, and do not connect it to a wall dimmer until we confirm. It is hardwired, so it can also be switched from your wall switch.

It is a hardwired wall mount that fits a standard junction box, and it runs on universal AC 110–240V. Hardwired means it is connected directly to your wall wiring, so it should be fitted by a qualified electrician who follows your local rules. Which kind of junction box counts as standard in your country, the weight and the fixing screws are not listed, so please tell us your country and ask us before you order. For a bed, you may want one on each side, which needs wiring on both sides.

The mounting height is not listed, so please tell us the wall and what you will use it for, and ask us before you order. As a general guide, a bedside reading light should sit where its light falls on the page when you are sitting up in bed, and a pair on both sides should be at the same height.

Switch off the power and let the light cool first. Wipe the brass with a dry, soft cloth, and use a soft brush for the diamond-patterned texture, where dust collects. Avoid water, abrasive pads, strong chemicals and brass polish, which can change the finish. No water-protection rating is listed, so keep it to dry indoor rooms and away from showers and sinks.