Dual Hemisphere Alabaster Pendant Light

The Dual Hemisphere Alabaster Pendant Light combines natural alabaster with a refined brass body and integrated LED lighting, creating a warm sculptural glow for modern interiors.

Natural Alabaster · Brass Body · Integrated LED

The Lyra Pendant suspends a hand-finished natural alabaster shade from a slender brass body – a single vertical drop of stone and metal. Lit, the alabaster reveals its translucent cloud veining and washes the room in a warm, even glow from the integrated LED.

Each shade is cut from natural stone, so no two pendants carry the same pattern – ideal above kitchen islands, dining tables, and bedside drops where a quiet, sculptural light is wanted.

Dual Hemisphere Alabaster Pendant Light

Hanging Wire 150 cm / 59" – adjustable on-site

Body Material Brass

Shade Material Natural alabaster (veining varies per piece)

Shade Color White alabaster

Light Source Integrated LED – no bulb required

Power ~10W

Lumens 1100 lm

IP Rating IP20 – indoor use

Wiring Hardwired

Select Size

Ø 5.9" × H 15.4"

D 15 × H 39 cm

Select Finish

Antique Brass & White

Light Temperature

Warm Light

FAQ

Can I replace the bulb?

No – the LED is integrated into the fixture, rated at roughly 10W and 1100 lumens, so there's no bulb to buy or swap. It's set to a fixed warm light color temperature.

Is the shade real stone?

Yes – the shade is hand-finished natural alabaster. Because it's a translucent, natural stone, it reveals its own cloud-like veining when lit, and no two pendants carry exactly the same pattern.

Can the hanging height be adjusted?

Yes – it ships with a 150cm (59") hanging wire that can be adjusted on-site to set your preferred drop height. Ask your electrician to set it during installation.

Where can I install this?

It's rated IP20, meaning it's designed for dry indoor use only – above a kitchen island, dining table, or as a bedside drop are all good fits. It's not suitable for bathrooms, covered outdoor areas, or other damp locations.

Does this need to be hardwired?

Yes – it's hardwired to the ceiling and should be installed by a licensed electrician.

How do I clean the alabaster shade?

Dust gently with a soft, dry cloth. Avoid soaking the stone or using abrasive or chemical cleaners, as alabaster is soft and porous and can scratch or stain more easily than glass or ceramic.

Will mine look exactly like the photos?

Close, but not identical. Each shade is cut from natural stone, so no two pendants carry the same veining pattern – that variation is part of genuine alabaster, not a defect.

As a natural stone shade, veining, translucency, and tone vary slightly from piece to piece – no two pendants are exactly alike.