Alabaster Wall Sconce – Oval Backplate Vertical Alabaster Shade Brushed Brass Living Room Feature Wall Fixture Custom

The shade is listed as alabaster, a natural stone, so every shade has its own pattern of clouds, veins and tone. In the photo, the stone is white and cream with fine caramel veining, and yours will be similar in overall feel but not identical, and the veining will fall in a different place on every shade. Alabaster is translucent, so when the light is on, the stone glows warmer and creamier than it looks when it is off.

There is one standard size, ⌀ 6.7″ (about 17cm) wide and H 10.7″ (about 27cm) tall, so it is a compact sconce. It suits a narrow wall beside a mirror, either side of a bed, a hallway, an entryway or a powder room wall that stays dry. How far it stands out from the wall (its depth) is not listed, so please ask us if you need it before you order.

This sconce takes a replaceable bulb, not a built-in LED. The listing gives the light source as an LED bulb or an Edison bulb with a G9 base. G9 is a small two-pin base, a different type from the screw-in E12 or E14 base, so check the base before you buy bulbs. How many bulbs it takes, whether a bulb is included, the maximum wattage and how the shade comes off to change the bulb are not listed, so please ask us before you order. As a general rule, LED bulbs run cooler than Edison bulbs, which is kinder to the stone and the finish.

The light is listed as warm white, 3000K, which suits the cream tone of the alabaster. If you replace the bulb, the new bulb sets the colour, so a warm white bulb keeps the creamy glow. The brightness depends on the bulb, and the power and brightness are not listed, so please ask us if you need those details. The stone spreads the light into a soft glow, and in the photo the glow also warms the brass plate behind it, so the sconce works best as ambient or accent light, not as a reading light.

No. The sconce is listed with a push-button switch and is not dimmable, so do not connect it to a dimmer.

There are two finishes: Antique Brass & White, and Black & White. The shade is white alabaster in both. The photo shows a brushed, warm brass tone, which goes well with the cream of the stone. Black gives a stronger contrast on the wall. Finishes can look slightly different from a screen to your room, so please ask us if an exact match to other fittings matters.

The sconce runs on universal AC 110–240V, so the fixture itself suits most countries. It is a wall-mounted light, so fitting it to your wall wiring should be done by a qualified electrician who follows your local rules. The wall fixing must be able to carry a brass plate and a stone shade. The type of wiring (for example, hardwired or plug-in), the weight and the position of the push-button switch are not listed, so ask us before you order.

The mounting height and the wiring position are not listed, so please tell us the wall, the room and where the wiring comes out, and ask us before you order. As a general guide, a sconce on either side of a bed or a mirror looks best when the shade sits around eye level.

Switch off the power and let the bulb cool first. Dust the stone with a soft, dry cloth or brush, handling it gently, because stone can chip if it is knocked. Alabaster is a soft stone that scratches and stains easily and reacts to acids, so avoid water, vinegar, lemon, glass cleaner and abrasive pads. Wipe the brass or metal plate with a dry soft cloth and avoid abrasive cleaners and metal polishes, which can mark the finish. It is for indoor use only, and no water-protection rating is listed, so keep it away from showers, sinks and damp spaces.

Yes. The standard sconce comes in Antique Brass & White or Black & White, with white alabaster. We also offer other metal body colours and finishes upon request. Contact our team with your preferred colour, finish or reference image. We will confirm the available options, pricing and production lead time before your order is placed.

Yes. The standard size is ⌀ 6.7″ × H 10.7″ (approx. 17 × 27 cm). Custom heights and widths can be requested to suit your wall and design requirements, subject to technical feasibility. Please provide your preferred dimensions so our team can review technical feasibility and confirm the custom quotation and production time.

Absolutely. The standard version in Antique Brass & White or Black & White can be purchased directly through our online store, subject to availability. Customization is optional and is only needed if you require a different metal body finish or dimensions.

Please contact us with your preferred body colour or finish, custom dimensions and any relevant design references. Our team will review your requirements and provide a quotation with the estimated production lead time. Once the specifications and price are confirmed, we will guide you through the custom ordering process.