Alabaster Wall Sconce – Circular Donut-Shaped Alabaster Ring Brushed Brass Living Room Feature Wall Fixture Custom

The ring is listed as Spanish alabaster, a natural stone, so every ring has its own pattern of clouds, veins and tone. In the photo, the stone is white and cream with soft grey and brown veining that runs in fine, branching lines, and yours will be similar in overall feel but not identical, because the veining will fall in a different place on every ring. Alabaster is translucent, so when the light is on, the stone glows warmer and creamier than it looks when it is off, and the photo shows the stone unlit.

There are three sizes, each as wide as it is tall: ⌀ 7.9″ × H 7.9″ (about 20cm), ⌀ 11.8″ × H 11.8″ (about 30cm) and ⌀ 15.7″ × H 15.7″ (about 40cm). Each size is 3.9″ (about 10cm) larger than the one before. The smallest suits a narrow wall, a pair on either side of a bed or a mirror, or a small hallway. The middle size is a good single feature on a wall beside a console or a bed. The largest is a strong statement piece over a console or a sofa, or in an entryway with a high wall. How far the ring stands out from the wall (its depth) and the thickness of the ring are not listed, so please ask us if you need them before you order.

The light source is a built-in (integrated) LED, so there is no bulb to buy or to screw in, and you do not need to match a bulb base. The number of LEDs, and the power, brightness and lifespan of the LED are not listed, and replacing the LED is not listed either, so please ask us before you order, and contact us if it ever needs service rather than opening the fixture yourself. The stone spreads the light into a soft glow, so the sconce works best as ambient or accent light, not as a reading light.

The default colour temperature is warm light, 3000K, which suits the cream tone of the alabaster. Other colour temperatures are not listed, so please ask us if you need a different one before you order.

Dimming is not listed for this sconce, so please ask us before you connect it to a dimmer. A wall dimmer that does not match the LED driver can cause flicker or damage, so check with us first. The sconce is hardwired, so it is switched from your wall switch, and no other control is listed.

The standard finish is Brass & White, a brass body with a white alabaster ring. In the photo, the small round plate at the back has a brushed, warm gold tone, which goes well with the cream of the stone. Finishes can look slightly different from a screen to your room. If you want a different metal colour, we offer custom finishes on request, and please ask us if an exact match to other fittings matters.

The sconce is hardwired, which means it is connected directly to your wall wiring, so it should be fitted by a qualified electrician who follows your local rules. A solid stone ring is a real weight, and the larger sizes weigh more, so the wall and the fixing must be able to carry it. The voltage, the weight and the way the ring is fixed to the plate are not listed, so please tell us your country and ask us before you order.

The mounting height and the wiring position are not listed, so please tell us the wall, the room and where the wiring comes out, and ask us before you order. In the photo, the small round plate sits behind the lower part of the ring, so the centre of the ring sits above the wiring point. As a general guide, a sconce looks best when the middle of the light sits around eye level, and a pair on either side of a bed or a mirror should be at the same height.

Switch off the power first. Dust the stone with a soft, dry cloth or brush, handling it gently, because stone can chip if it is knocked. Alabaster is a soft stone that scratches and stains easily and reacts to acids, so avoid water, vinegar, lemon, glass cleaner and abrasive pads, and handle it with clean, dry hands so that the pale stone stays clean. Wipe the brass plate with a dry soft cloth and avoid abrasive cleaners and metal polishes, which can mark the finish. No water-protection rating is listed, so keep it to dry indoor rooms and away from showers, sinks and damp spaces.

Yes. The standard sconce comes in Brass & White, with a white alabaster ring. We also offer other metal body colours and finishes upon request. Contact our team with your preferred colour, finish or reference image. We will confirm the available options, pricing and production lead time before your order is placed.

Yes. The standard sizes are ⌀ 7.9″ × H 7.9″, ⌀ 11.8″ × H 11.8″ and ⌀ 15.7″ × H 15.7″ (approx. 20, 30 and 40 cm). Custom sizes can be requested to suit your wall and design requirements, subject to technical feasibility. Please provide your preferred dimensions so our team can review technical feasibility and confirm the custom quotation and production time.

Absolutely. The standard Brass & White version in any of the listed sizes can be purchased directly through our online store, subject to availability. Customization is optional and is only needed if you require a different metal body finish or dimensions.

Please contact us with your preferred body colour or finish, custom dimensions and any relevant design references. Our team will review your requirements and provide a quotation with the estimated production lead time. Once the specifications and price are confirmed, we will guide you through the custom ordering process.