Alabaster Pendant Light – Circular Interlocking Vertical Slabs Brushed Brass Center Band Round Dining Table Fixture Custom

The tiles are listed as alabaster, a natural stone, so every tile has its own pattern of clouds, veins and tone. In the photo, the tiles are white with soft cream and grey veins, and yours will be similar in overall feel but not identical, because each tile is cut from a different piece of stone and the veins will fall on different tiles. The tiles on one chandelier may also differ from each other. Alabaster is translucent, so when the light is on, the stone glows warmer and creamier than it looks when it is off.

There are three widths: 15.8″ (about 40cm), 23.7″ (about 60cm) and 31.5″ (about 80cm), all with the same listed height of 59″ (about 150cm). As a rule of thumb, a chandelier over a table looks best when it is clearly narrower than the table. The smallest suits a bedroom, an entrance hall or a small round table, the middle size suits a dining table, a kitchen island or a living room, and the largest suits a long table, a stairwell or a big open space. Measure the table and the room before you order.

The light source is listed as LED. Whether it is a built-in module or a bulb you can swap, the bulb base, the number of lights, the power, the brightness and the colour temperature are not listed, so please ask us before you order, for example if the chandelier will be the main light of a room. The stone spreads the light into a soft glow.

No. The chandelier is controlled by a push button switch and is not dimmable, so do not connect it to a dimmer.

The chandelier is supplied with 59″ (150cm) of wire, which can be extended on request, and the listed height of 59″ most likely covers the ring and the wire together. Whether you can shorten the wire is not listed, so tell us your ceiling height and how low you want the ring to hang when you order, and ask us about the wire length you need. As a rule of thumb, the bottom of a chandelier over a dining table usually hangs about 30 to 36 inches (75 to 90cm) above the tabletop.

The light runs on 110–240V, so the fixture itself suits most countries. It is a ceiling-mounted light with a push button switch, so fitting it to your ceiling wiring should be done by a qualified electrician who follows your local rules. A ring of alabaster tiles with a brass band is a real weight, so the ceiling fixing point must be able to carry it, and the larger sizes need particular care. How it connects to the power supply, the weight and the position of the switch are not listed, so ask us before you order.

Switch off the power and let it cool first. Dust the tiles with a soft, dry cloth or brush, handling them gently, because stone can chip if it is knocked. Alabaster is a soft stone that scratches and stains easily and reacts to acids, so avoid water, vinegar, lemon, glass cleaner and abrasive pads. Wipe the brass band and ceiling plate with a soft, dry cloth and avoid scouring pads and strong cleaners. It is for indoor use only, and no water-protection rating is listed, so keep it away from showers, sinks and damp spaces. Over a kitchen island, keep it clear of steam and grease.

Yes. The standard chandelier features a brass metal body with white alabaster tiles. We also offer customized metal body colours and finishes upon request. Contact our team with your preferred colour, finish or reference image. We will confirm the available options, pricing and production lead time before your order is placed.

Yes. The standard widths are 15.8, 23.7 and 31.5 inches (40, 60 and 80 cm), all 59 inches high (150 cm), with 59 inches (150cm) of wire. Custom widths and heights can be requested, and the wire can be extended on request, to suit your space and design requirements. Please provide your preferred dimensions and the wire length you need so our team can review technical feasibility and confirm the custom quotation and production time.

Absolutely. The standard Brass & White version in any of the listed sizes can be purchased directly through our online store, subject to availability. Customization is optional and is only needed if you require a different metal body finish, dimensions or wire length.

Please contact us with your preferred body colour or finish, custom dimensions, wire length and any relevant design references. Our team will review your requirements and provide a quotation with the estimated production lead time. Once the specifications and price are confirmed, we will guide you through the custom ordering process.