Alora Travertine Ceiling Light

The Alora Travertine Ceiling Light combines a naturally veined yellow travertine disc with a warm walnut canopy for a clean, low-profile silhouette. An integrated 3000K LED glows through the stone from behind, highlighting its natural texture while providing soft ambient illumination for foyers, hallways, bedrooms, and other modern interiors.

Alora Travertine Ceiling Light

A flat disc of yellow travertine — Ø 30, 43, or 55 cm, just 7 cm thick — sits flush against the ceiling, framed by a slim walnut canopy that holds the disc in place. Integrated warm-white LEDs run behind the stone, lighting the travertine from within so the natural pitting and pale veining read as a soft, lit pattern across the surface. The fixture casts a quiet, even wash downward over kitchens, dining tables, hallways, and bedrooms — bright enough to function as a primary ceiling light, low-profile enough to disappear into a low ceiling.

Features

Yellow Travertine Disc

Natural pitting and veining glow when lit from behind.

Walnut Canopy

Solid wood frame holds the stone flat to the ceiling.

Integrated 3000K LED

40W warm white, sealed behind the stone disc.

3 Diameters

30, 43, or 55 cm — sized for foyer, hallway, or bedroom.

7 cm Profile

Sits tight to the ceiling — clears low rooms and bunk areas.

AC 110–240V

Hardwired, works on North America and EU mains.

Natural Travertine — Each Disc Is Unique

Yellow travertine is a sedimentary stone with open pores, fine pitting, and veining that varies block to block. Your disc will not match the photos exactly — the pattern, color saturation, and pit distribution are formed by the quarry, not the manufacturer. When the LED is on, the lit pits read as bright dots scattered across the surface; this is the stone, not a defect.

3000K Warm White — Fixed Color Temperature

The integrated LED ships at 3000K only. The light is not dimmable and is controlled by a standard wall switch. If you need a different color temperature for a specific install, contact us before ordering.

Sizes

Three Diameters · All 7 cm Tall

• Small — Ø 30 cm × H 7 cm (Ø 11.8″ × H 2.1″)
• Medium — Ø 43 cm × H 7 cm (Ø 16.9″ × H 2.1″)
• Large — Ø 55 cm × H 7 cm (Ø 21.6″ × H 2.1″)
• 

Specifications

Shade MaterialYellow travertine (natural stone)Frame MaterialSolid walnut wood + metal hardwareFinishWalnut + Yellow TravertineLight SourceIntegrated LED (non-replaceable)Color Temperature3000K warm whitePowerMax 40WVoltageAC 110–240VDimmingNot dimmable — push-button / on-off switchMountingHardwired flush mount, ceilingWire Length150 cm / 59″ (extendable on request)Profile Height7 cm / 2.1″ — fits low-ceiling roomsSizesØ 30 / 43 / 55 cmStone VariationNatural — each disc has unique vein and pit patternEnvironmentIndoor only — dry locations

Downloads

   Installation Guide A   

Installation

• Hardwired ceiling installation — a licensed electrician is recommended.
• Compatible with a standard wall switch (not included). The fixture is not dimmable; do not pair it with a dimmer.
• Ships with 150 cm / 59″ of supply wire from the canopy. Longer runs are available on request before the order ships.
• Integrated LED — the light source is not user-replaceable. The fixture is rated for typical residential use.
• For indoor use only. Not suitable for bathrooms, showers, or damp locations.
• The travertine disc is heavier than a standard flush mount. Confirm the ceiling junction box is secured into a joist or fan-rated brace before mounting the larger sizes.

FAQ

Which size fits my room?

As a rough guide for a single fixture as the primary ceiling light: the Ø 30 cm fits a small bedroom, hallway, walk-in closet, or entry up to about 8 m². The Ø 43 cm suits a standard bedroom, dining nook, or kitchen of 10–14 m². The Ø 55 cm is sized for a full living room, larger dining room, or wide hallway of 16 m² and up. For larger rooms, two units spaced evenly look better than one oversized disc.

Will my disc look exactly like the photos?

No. Yellow travertine is quarried stone — every disc has its own pattern of veining, pitting, and color tone. The photos show one representative piece. When the LED is on, you will see small bright spots where pits run through the stone; this is normal travertine behavior, not damage or a manufacturing flaw.

Can I use a dimmer with this light?

No. The integrated LED is wired for a standard on-off switch and is not dimmable. Connecting it to a dimmer can cause flicker, buzzing, or premature LED failure. If you want a dimmable warm-white flush mount in a similar form, contact us before ordering and we can quote a dimmable build.

Do I need an electrician to install it?

Yes — this is a hardwired fixture and we recommend a licensed electrician. The 150 cm supply wire connects to the ceiling junction box; the walnut canopy then mounts directly to the box and holds the travertine disc against the ceiling. The 43 and 55 cm sizes are heavy enough that the junction box should be confirmed as joist-mounted or brace-supported before installation.

Is the Alora certified for North America and Europe?

Yes. It holds certifications compatible with North America, Saudi Arabia, Europe, and Australia and operates on AC 110–240V worldwide.