Modern Linear Brass and Alabaster Pendant Light

The Linear Brass and Alabaster Pendant Light combines a refined brass bar, a continuous natural alabaster panel, and integrated LED illumination for dining tables, kitchen islands, and consoles.

Lit, the integrated LED runs the full length of the bar, diffusing evenly through the alabaster panel and revealing the stone's natural veining in a soft, continuous line – a versatile fixture for a dining table, kitchen island, or console. Available in two lengths and two finishes.

Linear Brass and Alabaster Pendant Light Details

• Material: Copper, alabaster
• Light source: Integrated LED (non-replaceable)
• Kelvin range: Warm White (3000K)
• Power: Max 60W
• Voltage: AC 110–240V
• Mounting: Ceiling, dual-cable suspension, hardwired
• Finishes: White, Gold, Black
• Alabaster shade colour: White
• Process: Electroplating, polishing, cutting
• Environment: Indoor

Select Size

L 39.4" × H 2.4"

L 100 × H 6 cm

L 47.2" × H 2.4"

L 120 × H 6 cm

Select Colour

Gold & White Black & White

Kelvin Range

Warm Light (3000K)

FAQ

Can I replace the LED?

No – the LED strip is integrated into the bar and is not designed to be replaced. Modern integrated LEDs typically exceed 25,000 operating hours. If it fails, the fixture may require professional service.

Is the panel real stone?

Yes – the diffuser panel is genuine alabaster. As a natural, translucent stone, it glows softly and evenly when lit, showing its own unique veining along the full length of the bar.

Which size should I choose?

Both sizes share the same 6cm height, so the choice comes down to length – 100cm suits a smaller table or console, while 120cm makes a bolder statement over a longer dining table or kitchen island.

What's the difference between the Gold and Black finish?

Both finishes use the same copper frame and alabaster panel, so the only difference is the metal's colour – gold reads warmer and more traditional, while black gives a more contemporary, understated look.

Is it hardwired or plug-in?

This is a ceiling-mounted fixture on dual suspension cables, typically hardwired by a licensed electrician like most pendants of this scale.

Can I use this in a bathroom or outdoors?

No – it's designed for indoor, dry spaces only.

How do I clean the alabaster panel?

Dust gently with a soft, dry cloth. Avoid soaking the stone or using abrasive or chemical cleaners, as alabaster is soft and porous and can scratch or stain more easily than glass or ceramic.

Will mine look exactly like the photos?

Close, but not identical. As a natural stone, each panel shows its own unique veining and tone – that variation is part of genuine alabaster, not a defect.

As a natural stone, veining, translucency, and tone vary slightly from panel to panel and piece to piece – no two pendants are exactly alike.