Linear Alabaster Pendant Light

The Linear Alabaster Pendant Light features a glowing natural stone tube, slim brass rods, and integrated LED lighting for kitchen islands, dining areas, and hallways.

Lit, the integrated LED runs the full length of the tube, diffusing evenly through the alabaster and tracing the stone's natural veining along its surface – a clean, linear fixture suited to a kitchen island, console table, or hallway. Available in three lengths.

Linear Alabaster Pendant Light DetailsMaterial: Brass, alabaster

• Light source: Integrated LED (non-replaceable)
• Kelvin range: Warm Light
• Power: ~34W
• Voltage: AC 110–240V
• Mounting: Ceiling, dual-cable suspension, hardwired
• Finish: Black, brass
• Shade details: White alabaster
• Process: Cutting, polishing, electroplating
• Environment: Indoor

Select Size

L 39" × H 5.2"

L 100 × H 13 cm

L 47.3" × H 5.2"

L 120 × H 13 cm

L 59" × H 5.2"

L 150 × H 13 cm

Select Colour

Black & Brass

Kelvin Range

Warm Light

FAQ

Can I replace the LED?

No – the LED strip is integrated into the tube and is not designed to be replaced. Modern integrated LEDs typically exceed 25,000 operating hours. If it fails, the fixture may require professional service.

Is the tube real stone?

Yes – the tube is genuine alabaster. As a natural, translucent stone, it glows softly and evenly when lit, showing its own unique veining along the full length of the fixture.

Which size should I choose?

All three sizes share the same 13cm height, so the choice comes down to length – 100cm suits a smaller console or breakfast bar, while 150cm makes a bolder statement over a long dining table or kitchen island.

Is it hardwired or plug-in?

This is a ceiling-mounted fixture on dual suspension cables, typically hardwired by a licensed electrician like most pendants of this scale.

Can the cable length be adjusted?

The dual cables can typically be trimmed to the drop height needed for your ceiling during installation. If you need a specific drop length, check with your electrician or supplier before installation.

Can I use this in a bathroom or outdoors?

No – it's designed for indoor, dry spaces only.

How do I clean the alabaster tube?

Dust gently with a soft, dry cloth. Avoid soaking the stone or using abrasive or chemical cleaners, as alabaster is soft and porous and can scratch or stain more easily than glass or ceramic.

Will mine look exactly like the photos?

Close, but not identical. As a natural stone, each tube shows its own unique veining and tone – that variation is part of genuine alabaster, not a defect.

As a natural stone, veining, translucency, and tone vary slightly from tube to tube and piece to piece – no two pendants are exactly alike.