Adler Textured Glass Flush Mount

Adler Textured Glass Flush Mount · Molded Glass Drum · Integrated LED · White or Beige

Adler Textured Glass Flush Mount — Diamond Glass Drum with Starburst Diffuser

This diamond textured glass flush mount pairs two distinct patterns on one drum-shaped fixture — a diamond-quilted texture running around the sides and a radial starburst pattern cut into the bottom diffuser panel. Molded glass forms the outer drum over an acrylic inner diffuser, so light passes through both layers and picks up the starburst detail as a visible pattern once lit rather than glowing as a flat, even disc. It runs on a built-in integrated LED panel array, sealed as a non-user-replaceable module, at 24W max integrated line with the low-voltage driver built in and wired for 110V-240V. It's a hardwired flush mount with a flat ceiling base assembly, sized at Ø15" x H5.9" and offered in white or beige with a warm light color temperature. The powder-coated matte off-white and cream hardware finish and dual-pattern glass suit a glam, transitional bedroom or hallway ceiling under 8 feet, where a flush profile is needed but a plain dome or drum shade would look too plain.

Key Features

• Diamond-quilted texture around the drum sides
• Radial starburst pattern cut into the bottom diffuser panel
• Molded glass drum over an acrylic inner diffuser
• Powder-coated matte off-white and cream hardware finish
• Sealed integrated LED panel array, non-user-replaceable module
• 24W max integrated line, internal low-voltage driver included
• Hardwired flush mount with a flat ceiling base assembly

Specifications

MaterialHeavy-Gauge Iron Chassis, Structural Metal Fittings, Molded Glass Drum, Acrylic Inner DiffuserHardware FinishPowder-Coated Matte Off-White / CreamLight SourceIntegrated LED Panel Array (Built-In Continuous System; Non-User Replaceable Module)Maximum Wattage24W Max Integrated LineVoltage110V - 240V (Internal Low-Voltage Driver Included)Installation TypeHardwired / Flat Ceiling Flush Mount Base AssemblyColor OptionsWhite, BeigeKelvin RangeWarm LightSizeØ15" x H5.9" / Dia38cm x H15cm

Where It Works

Center it in a bedroom or hallway ceiling under 8 feet where a pendant would hang too close, letting the diamond-quilted sides and starburst underside show clearly from below. The white finish leans cooler and more neutral, while the beige finish reads warmer, so the choice can be matched to the room's existing wall tone.

Size & Dimensions

Downloads

FAQ

Can I replace the light source?

No. The integrated LED panel array is a sealed, non-user-replaceable module built into the fixture.

What's the difference between the side texture and the bottom pattern?

The drum sides carry a diamond-quilted texture, while the bottom diffuser panel has a separate radial starburst pattern.

How is it installed?

It's a hardwired flush mount with a flat ceiling base assembly. We recommend a licensed electrician for installation.

What colors are available?

White or beige, both with a warm light color temperature.