Alabaster Pendant Light – Fluted Fan-Shaped Multi-Panel Alabaster Brushed Brass Dining Room Table Fixture Custom

The shade is listed as Spanish alabaster, a natural stone, so every panel has its own pattern of clouds, veins and tone. In the photo, the stone panels are white and cream with soft, cloudy caramel veining, and yours will be similar in overall feel but not identical. With several panels on one pendant, some will be paler and some more veined, and that variety is part of the look. Alabaster is translucent, so when the light is on, the stone glows warmer and creamier than it looks when it is off.

The finish is lacquered burnished brass, a warm, aged gold tone, and the photo shows it on the ceiling plate, the rod and the small studs that hold the stone. Lacquered means it has a clear protective coating, which helps the brass keep its look, so please do not use brass polish or abrasive cleaners, which can damage the coating. Finishes can look slightly different from a screen to your room, so please ask us if an exact match to other fittings matters.

There is one standard size, ⌀ 11.8″ (about 30cm) in diameter and H 11.8″ (about 30cm) tall. In the photo, several curved, petal-shaped stone panels stand around a central light, like an open flower held upside down, below a long straight brass rod and a drum-shaped ceiling plate. It suits a bedside, an entryway, a hallway or a stairwell, and it looks good hung in a group of two, three or more over a kitchen island, a dining table or a bar. Whether the listed height includes the rod and the ceiling plate is not listed, so please ask us about the total hanging height.

This pendant takes a replaceable bulb, not a built-in LED. The listing gives the light source as an LED bulb or an Edison bulb, with an E12 or E14 candelabra base. E12 is the small base common in North America and E14 is the small base common in Europe and many other countries, so check the base before you buy a bulb. In the photo, a single frosted, tube-shaped bulb shows between the stone panels, so the shape of the bulb also changes how the light looks. How many bulbs it takes, whether a bulb is included, which base is fitted to your pendant and the maximum wattage are not listed, so please ask us before you order. The brightness and the colour of the light come from the bulb, so a warm white bulb gives the creamiest glow through the alabaster. As a general rule, LED bulbs run cooler than Edison bulbs, which is kinder to the stone and the finish.

Dimming is not listed for this pendant, so please ask us before you connect it to a dimmer. If you do use a dimmer, the bulb must be dimmable and must suit the dimmer. The pendant is hardwired, so it is switched from your wall switch, and no other control is listed.

In the photo, the stone panels hang from a long, straight brass rod under a drum-shaped ceiling plate. The length of the rod, the total hanging height and whether the rod can be shortened or lengthened are not listed, so please tell us your ceiling height and how low you want it to hang, and ask us before you order. If you hang several together, tell us if you want them at different heights.

The pendant is hardwired, which means it is connected directly to your ceiling wiring, so it should be fitted by a qualified electrician who follows your local rules. The ceiling fixing point must be able to carry the stone panels and the brass rod. The voltage and the weight are not listed, and the right bulb base depends on your country, so please tell us your country and ask us before you order.

Alabaster is a soft stone, and the panels are thin, curved pieces that stand out at the edges, so they can chip or crack if they are knocked, so handle the pendant with care when you unpack it, fit it and clean it. In the photo, the panels are held by small brass studs. How many panels there are and whether a single panel can be replaced are not listed, so please contact us if a panel is damaged and ask us before you order if this matters to you.

Switch off the power and let the bulb cool first. Dust the stone panels with a soft, dry cloth or brush, handling them gently. Alabaster is a soft stone that scratches and stains easily and reacts to acids, so avoid water, vinegar, lemon, glass cleaner and abrasive pads. Wipe the lacquered brass with a dry soft cloth and avoid abrasive cleaners and metal polishes. No water-protection rating is listed, so keep it to dry indoor rooms and away from showers, sinks and damp spaces. Over a kitchen island, keep it clear of steam and grease.

Yes. The standard pendant comes in Brass & White, with white Spanish alabaster. We also offer other metal body colours and finishes upon request. Contact our team with your preferred colour, finish or reference image. We will confirm the available options, pricing and production lead time before your order is placed.

Yes. The standard size is ⌀ 11.8″ × H 11.8″ (approx. 30 × 30 cm). Custom sizes can be requested to suit your space and design requirements, and the rod can be made longer or shorter for your ceiling height, subject to technical feasibility. Please provide your preferred dimensions so our team can review technical feasibility and confirm the custom quotation and production time.

Absolutely. The standard Brass & White version can be purchased directly through our online store, subject to availability. Customization is optional and is only needed if you require a different metal body finish or dimensions.

Please contact us with your preferred body colour or finish, custom dimensions and any relevant design references. Our team will review your requirements and provide a quotation with the estimated production lead time. Once the specifications and price are confirmed, we will guide you through the custom ordering process.