Tube Alabaster Cylinder Wall Lamp

Tube Alabaster Cylinder Wall Lamp · Alabaster & Brass · Integrated LED · 3 Lengths

Tube Alabaster Cylinder Wall Lamp — Integrated LED 3000K

A white alabaster cylinder sits between two brass end mounts, glowing along its full length from an integrated LED fixed at warm white 3000K — there's no bulb to change. It's built in three modular lengths: a single-head 13.8" bar, a two-head 27.5" bar, or a three-head 41.3" bar, so you can size it to a narrow powder room mirror or a full-height vanity wall. Finished in gold or black hardware with the alabaster shade in white, it mounts to the wall on two points and runs on a built-in push button switch (not dimmable), max 40W, AC 110-240V.

Key Features

• White alabaster cylinder shade lights along its full length, mounted between two brass (or black) end caps
• Integrated LED fixed at warm white 3000K — no bulb to buy or replace, max 40W
• Available in three modular lengths — 1-head 13.8", 2-head 27.5", or 3-head 41.3" — to fit a narrow mirror or a full vanity wall
• Alabaster shade finished with electroplating, polishing, and cutting for a consistent stone-like surface
• Built-in push button switch on the fixture (not dimmable)
• Two-point wall mount, hardwired for indoor use
• Runs on standard AC 110-240V

Specifications

MaterialAlabaster, BrassFinish OptionsWhite / Gold / BlackAlabaster Shade ColorWhiteColor OptionGold & White / Black & WhiteProcessElectroplating, Polishing, CuttingLight SourceIntegrated LED — not a replaceable bulbKelvin RangeWarm Light (3000K)PowerMax 40WControl MethodPush button switch (not dimmable)MountingWallVoltageAC 110-240VEnvironmentIndoorSize Options1 Head: Ø 2.4" × H 13.8" (Dia 6cm × H 35cm)
2 Head: Ø 2.4" × H 27.5" (Dia 6cm × H 70cm)
3 Head: Ø 2.4" × H 41.3" (Dia 6cm × H 105cm)Factory Shipment5-10 days on average to prepare

Size & Dimensions

Where It Works

Mounted vertically on either side of a bathroom mirror, the alabaster bar gives even, shadow-free light for grooming without a row of exposed bulbs — the 1-head length suits a compact powder room, while the 2- or 3-head length covers a taller vanity mirror. It also works beside a bedroom dresser mirror or as a soft accent light in a hallway, with the gold or black hardware option to match existing fixtures.

Downloads

FAQ

Can I replace the bulb if it burns out?

No — the LED is integrated into the fixture rather than a replaceable bulb, and it's fixed at warm white 3000K.

Is it dimmable?

No. It's controlled by a built-in push button switch and is not dimmable.

Do I need an electrician to install this?

Yes — this is a hardwired wall fixture and should be connected by a licensed electrician.