Metal Acrylic Linear Sconce

Metal Acrylic Linear Sconce · Capsule-Shaped Metal Frame · Continuous LED Light Strip · Brushed Gold or Black

Metal Acrylic Linear Sconce — Pill-Shaped Bar Wall Light for Hallway or Living Room

This wall sconce frames a continuous strip of matte white acrylic diffuser inside a rounded, capsule-shaped metal outline, mounted slightly off the wall on a small round backplate so the whole bar appears to float. Because the LED panel array runs the full length of the frame rather than sitting at a single point, the fixture reads as an unbroken line of light bordered by a clean metal edge, rather than a shade with a visible bulb. It's built from a heavy-gauge iron metal chassis with a high-density acrylic diffuser lens, finished in brushed gold metal or black with a matte white diffuser, and runs on an integrated LED panel array (built-in, continuous, non-replaceable) across a 110V–240V universal voltage input, fixed to a warm white tone. It comes in three sizes — a slim vertical bar at Dia 5.1" x H 18.1", and two wider horizontal formats at Dia 20.9" x H 17.7" and Dia 26.4" x H 18.1" — and two colourways, Gold & Frosted White or Black & Frosted White. It installs as a hardwired wall sconce with junction box mount assembly, suiting a modern, minimalist, or contemporary hallway, living room, or stairwell.

Key Features

• Rounded, capsule-shaped metal frame around a full-length acrylic diffuser
• Continuous LED panel array runs the full length of the bar for unbroken light
• Mounts slightly off the wall on a compact round backplate for a floating look
• Heavy-gauge iron chassis with a high-density acrylic diffuser lens
• Available in three sizes, from a slim vertical bar to two wider horizontal formats

Specifications

MaterialHeavy-Gauge Iron Metal Chassis, High-Density Acrylic Diffuser LensHardware FinishBrushed Gold Metal / Matte White Acrylic DiffuserLight SourceIntegrated LED Panel Array (Built-in, Continuous; Non-Replaceable)Colour TemperatureWarm White (fixed)Voltage110V – 240V Universal InputInstallation TypeHardwired Wall Sconce / Junction Box Mount AssemblyColour / SizeGold & Frosted White, Black & Frosted White
Ø 5.1" x H 18.1" / 13cm x H 46cm
Ø 20.9" x H 17.7" / 53cm x H 45cm
Ø 26.4" x H 18.1" / 67cm x H 46cm

Where It Works

Choose the slim Dia 5.1" x H 18.1" size for a vertical accent beside a mirror, doorway, or in a narrower hallway, or one of the wider formats (Dia 20.9" or Dia 26.4") for a more horizontal bar suited to sitting above a console table, headboard, or artwork. Because the LED panel array runs continuously along the full length of the frame rather than radiating from a single bulb, the light reads as one even, unbroken line rather than a bright point that fades toward the shade's edges. The small round backplate holds the bar slightly off the wall, so a thin shadow line separates the fixture from the surface behind it, reinforcing its floating, architectural look. Since the colour temperature is fixed to a warm white tone, the glow suits both general ambient lighting and softer accent use. Gold pairs naturally with warmer, more traditional palettes, while Black offers a cooler, more graphic contrast against a light wall. This is a hardwired fixture that mounts to a wall junction box, so professional installation is recommended.

Size & Dimensions

Downloads

FAQ

Can I replace the LED if it stops working?

No, this fixture uses an integrated LED panel array that's built into the unit as a continuous system and is not replaceable. If the light source eventually fails, the fixture itself would need to be replaced.

Should I mount this sconce vertically or horizontally?

Either works depending on the size chosen; the slimmer Dia 5.1" x H 18.1" size is well suited to a vertical mount, while the wider Dia 20.9" and Dia 26.4" sizes read naturally as horizontal bars.

What colour temperature does this light give off?

It's fixed to a warm white tone; there's no adjustable colour temperature or dimming setting on this particular fixture.

Is this sconce compatible with electrical systems outside North America?

Yes, it runs on a 110V–240V universal voltage input, making it compatible with most regional electrical systems.

Is this sconce hardwired or plug-in?

It's a hardwired wall sconce that mounts to a junction box, not a plug-in fixture, so installation will involve wiring it into your wall electrical box.