Halo Frosted Disc Semi-Flush Chandelier

A common rule is to add the room's length and width in feet and use that number as the fixture's diameter in inches. By that rule, the 18.1″ size suits a room where length plus width is about 18 feet, such as a 9 × 9 foot bedroom, the 24″ size suits about 24 feet, such as a 12 × 12 foot room, and the 29.9″ size suits about 30 feet, such as a 15 × 15 foot living room.

It sits close to the ceiling, with a short stem and no long chain, so it needs much less height than a hanging chandelier. Subtract the listed height from your ceiling height for an estimate of where the bottom will sit. In a walkway, keep the bottom at least 7 feet above the floor. If your ceiling is lower than 8 feet, ask us to confirm before you order.

Mostly not. The centre of each disc is frosted white, which hides the bulbs and spreads the light into a soft glow. The clear rim around each disc lets some light through at the edges, so you see a bright outline and not a bare bulb. From directly below, you may glimpse a bulb between the lower discs.

Both LED and Edison bulbs fit. The socket is E14, which is slightly wider than the E12 base common in the US, so check the base printed on the box. With white glass, a warm white gives a soft, creamy glow, and a cooler white gives a crisper, brighter look. Buy all the bulbs in the same type and colour temperature so the whole fixture glows evenly.

No. It is rated IP20, which means no protection against water, so it is for dry indoor rooms only. Do not hang it over a shower or bathtub, or anywhere it can get steam or splashes. A bedroom, hallway, dining room or living room is what it is designed for.

It is listed as compatible with common wall switches, which are not included. Dimming is not listed. If you want to use a dimmer, ask us first so we can confirm it works with your bulbs and setup.

Switch it off and let the bulbs cool. Dust the discs with a soft, dry microfiber cloth, holding each one steady with your other hand. Chrome shows fingerprints and water spots, so wipe it with a dry cloth, and keep liquid cleaners and abrasive pads off the finish.