Fluted Brass Alabaster Cylinder Sconce

Cylindrical Veined Alabaster Shade · Fluted Brass Column · Blackened Metal Bracket. Fluted Brass Alabaster Cylinder Sconce combines natural veined alabaster with a vertically ribbed brass column and blackened metal bracket for a refined architectural wall light.

Fluted Brass Alabaster Cylinder Sconce — Veined Alabaster Cylinder Wall Sconce

This wall sconce mounts on a blackened metal bracket, which meets a fluted brass column with fine vertical ribbing before rising into a tall cylindrical alabaster shade above. The alabaster carries pronounced, marble-like veining, with darker streaks running through the pale stone that catch the warm light glowing from within, giving the shade a dramatic, almost painterly quality when lit. Built from brass and alabaster in a Blackened finish, it takes E14 base bulbs, LED or Edison compatible, and runs on AC 110V–240V. It's rated IP20 and damp-resistant (though not waterproof) for indoor use only, and installs as a hardwired wall-mounted fixture, with control compatible with common wall switches (not included). It comes in one size, Dia 3.6" x H 8.9", and is certified for use in North America, Saudi Arabia, Europe, and Australia, suiting a hallway, bedroom, or living room wall as a single accent or paired fixture.

Key Features

• Cylindrical alabaster shade with pronounced, marble-like veining glows dramatically when lit
• Fluted brass column with fine vertical ribbing adds warm metallic texture beneath the shade
• Blackened metal bracket and hardware keep the overall look grounded and contemporary
• Compatible with common wall switches for straightforward on/off operation
• Certified for North America, Saudi Arabia, Europe, and Australia

Specifications

MaterialBrass, AlabasterShade FinishWhite Alabaster (Marble-Like Veining)Light SourceE14 Base, LED or Edison BulbVoltageAC 110V – 240VMoisture ResistanceIP20, Damp-Rated, Not Waterproof, Indoor Use OnlyWiringHardwiredControlCompatible with Common Wall Switches (Not Included)Installation TypeHardwired Wall Mount, Indoor UseCertificationNorth America · Saudi Arabia · Europe · AustraliaColour / SizeBlackened + White Alabaster
Dia 5.1" x H 13.4" / Dia 13cm x H 34cm

Where It Works

At Dia 5.1" x H 13.4", this sconce has a slim, upright profile that suits placement beside a bedroom headboard, along a hallway, or flanking a mirror or entryway in pairs. The dramatic veining running through the alabaster gives each fixture a slightly different pattern, so the shade reads as a small, individual work of natural material rather than a uniform, mass-produced shade. The fluted brass column beneath the shade catches ambient light even when unlit, adding textural interest to the wall during the day, while the blackened bracket and hardware keep the overall silhouette from feeling overly ornate. Since control is compatible with common wall switches, the fixture can be operated from a standard wall switch once wired in. The IP20 damp rating means it can tolerate normal indoor humidity but is not designed for direct water exposure, so bathrooms with heavy moisture or fully exposed outdoor locations should be avoided. As this is a hardwired fixture, installation should be handled by a licensed electrician.

Size & Dimensions

Downloads

FAQ

Is the shade alabaster or marble?

The shade material is alabaster, though its veining has a bold, marble-like appearance; each shade's exact pattern will vary slightly since it's a natural stone.

Does this need to be hardwired by an electrician?

Yes, it's a hardwired fixture, so installation should be handled by a licensed electrician.

Can I install this in a bathroom?

It's rated IP20 and damp-resistant for normal indoor humidity, but it's not waterproof, so it shouldn't be installed in areas with direct water exposure such as a shower.