Dolly Alabaster Geometric Sconce

Dolly Alabaster Geometric Sconce · Natural Alabaster & Metal · Integrated LED · Indoor

Dolly Alabaster Geometric Sconce — Twin-Disc Backlit Natural Stone

A single metal rod threads through two offset alabaster discs, each backlit from within to cast a soft, warm glow along the wall. Available in nickel or black, this wall sconce works well in pairs flanking a fireplace, stacked along a stairwell, or mounted either side of a bed for ambient light without a plug or cord. It's a hardwired fixture with a fixed warm white output — no dimmer, no bulb to swap. At 23.6 inches tall with two 11.8-inch alabaster discs, it reads as a single sculptural piece rather than a typical sconce, at home in a mid-century living room or a minimalist hallway.

Key Features

• Two natural alabaster discs, backlit for a warm, glowing silhouette — each piece has unique natural veining
• Discs are offset on a single vertical metal rod for a sculptural, S-curve profile
• Available in Nickel & White or Black & White finish
• Integrated LED — no bulb to buy or replace
• Fixed warm white output — not dimmable
• Hardwired installation — no visible cord or plug
• Each disc Ø 11.8" (30 cm); overall fixture 23.6" (60 cm) tall

Finish

Nickel & White

Black & White

Top half = rod finish, bottom half = alabaster disc tone.

Specifications

MaterialMetal rod, natural alabaster discsFinish OptionsNickel & White / Black & WhiteLight SourceIntegrated LED — warm white, ~3000KRated Life~50,000 hoursDimmingNot dimmableMountingWall — hardwiredVoltageAC 110-240VEnvironmentIndoor, IP20SizeEach disc Ø 11.8" (30 cm) · Overall H 23.6" (60 cm)CertificationsNA / SA / EU / AU

Size & Dimensions

Where It Works

Mount a pair flanking a fireplace or media wall for symmetrical ambient light, stack one along a stairwell landing, or place either side of a headboard for a soft glow without a bedside lamp. The sculptural silhouette reads well in a mid-century living room, a minimalist hallway, or a transitional entryway.

Downloads

FAQ

Can I dim this sconce?

No — the integrated LED has a fixed warm white output and is not compatible with a dimmer switch.

Do I need an electrician to install this?

Yes. This is a hardwired fixture and should be connected to a junction box by a licensed electrician.

Why does my alabaster look different from the photo?

Each disc is cut from natural alabaster, so veining and translucency vary slightly piece to piece — this is expected, not a defect.

Is this certified for North America and Europe?

Yes. It holds certifications compatible with North America, Saudi Arabia, Europe, and Australia and operates on AC 110-240V worldwide.

Natural alabaster is quarried, not manufactured — expect unique veining and subtle translucency variation between pieces.