Cylindrical Alabaster Line Wall Light

Cylindrical Alabaster Line Wall Light · Alabaster & Metal · Integrated LED · Gold & White

Cylindrical Alabaster Line Wall Light — Vertical LED Bar

A single continuous alabaster cylinder runs the full height of this sconce, capped in gold rings at the top and bottom and held to the wall by a horizontal gold plate that crosses the middle of the bar. At Ø 2.4" × H 27.5" (Dia 6cm × H 70cm), it lights up above and below the center mount from an integrated LED fixed at warm white 3000K — there's no bulb to change. It's a hardwired wall fixture with a built-in push button switch (not dimmable), running on AC 110-240V.

Key Features

• One continuous alabaster cylinder, not split into separate segments, lit along its full height from behind the center mount
• Horizontal gold plate crosses the middle of the bar as the wall mounting point, with matching gold rings capping the top and bottom ends
• Integrated LED fixed at warm white 3000K — no bulb to buy or replace
• Alabaster finished with electroplating, polishing, and cutting for a consistent stone-like surface
• Built-in push button switch on the fixture (not dimmable)
• Slim vertical footprint: Ø 2.4" × H 27.5" (Dia 6cm × H 70cm)
• Hardwired for indoor use, runs on standard AC 110-240V

Specifications

MaterialAlabaster, MetalFinish OptionsWhite / GoldAlabaster Shade ColorWhiteColor OptionGold & WhiteProcessElectroplating, Polishing, CuttingLight SourceIntegrated LED — not a replaceable bulbKelvin RangeWarm Light (3000K)Control MethodPush button switch (not dimmable)MountingWallVoltageAC 110-240VEnvironmentIndoorSizeØ 2.4" × H 27.5" (Dia 6cm × H 70cm)Factory Shipment5-10 days on average to prepare

Size & Dimensions

Where It Works

Mount a pair on either side of a bathroom mirror or vanity for even, shadow-free light along the full height of the bar. It also works as a slim accent beside a bedroom dresser mirror, in a hallway, or flanking an entryway console — the gold center plate and end caps read as a deliberate hardware detail rather than a hidden mounting bracket.

Downloads

FAQ

Can I replace the bulb if it burns out?

No — the LED is integrated into the fixture rather than a replaceable bulb, and it's fixed at warm white 3000K.

Is it dimmable?

No. It's controlled by a built-in push button switch and is not dimmable.

Do I need an electrician to install this?

Yes — this is a hardwired wall fixture and should be connected by a licensed electrician.