Cylindra Alabaster Brass Wall Light

Cylindra Alabaster Brass Wall Light · Metal & Alabaster · Integrated LED · 2 Sizes

Cylindra Alabaster Brass Wall Light — Two-Segment LED Sconce

Two stacked alabaster cylinder segments sit inside a metal frame, held by vertical side rails and a center ring joint, with matching rings capping the top and bottom. Choose from two lengths — Ø 3.1" × H 23.6" (Dia 8cm × H 60cm) or Ø 3.1" × H 31.5" (Dia 8cm × H 80cm) — in a black-and-white or gold-and-white finish. Both segments light up from an integrated LED fixed at warm white 3000K, so there's no bulb to change. It's a hardwired wall fixture with a built-in push button switch (not dimmable), running on AC 110-240V.

Key Features

• Two alabaster cylinder segments held inside a metal frame with vertical side rails and a center ring joint
• Matching metal rings cap the top and bottom of the fixture for a finished, framed look
• Choose between two lengths — Ø 3.1" × H 23.6" (60cm) or Ø 3.1" × H 31.5" (80cm) — to fit different mirror or wall heights
• Integrated LED fixed at warm white 3000K lights both segments — no bulb to buy or replace
• Alabaster finished with electroplating, polishing, and cutting for a consistent stone-like surface
• Built-in push button switch on the fixture (not dimmable)
• Hardwired for indoor use, runs on standard AC 110-240V

Specifications

MaterialMetal, AlabasterFinish OptionsBlack / GoldAlabaster Shade ColorWhiteColor OptionBlack & White / Gold & WhiteProcessElectroplating, Polishing, CuttingLight SourceIntegrated LED — not a replaceable bulbKelvin RangeWarm White (3000K)Control MethodPush button switch (not dimmable)MountingWallVoltageAC 110-240VEnvironmentIndoorSize OptionsØ 3.1" × H 23.6" (Dia 8cm × H 60cm)
Ø 3.1" × H 31.5" (Dia 8cm × H 80cm)Factory Shipment5-10 days on average to prepare

Size & Dimensions

Where It Works

Mount a pair on either side of a bathroom mirror or vanity, using the shorter 23.6" length for a compact powder room or the taller 31.5" length for a full vanity mirror. The metal frame and side rails give it a heavier, more architectural presence than a plain alabaster tube, so it also reads well as a standalone accent beside a bedroom mirror or in an entryway with exposed brass or blackened-metal hardware elsewhere in the room.

Downloads

FAQ

Can I replace the bulb if it burns out?

No — the LED is integrated into the fixture rather than a replaceable bulb, and it's fixed at warm white 3000K.

Is it dimmable?

No. It's controlled by a built-in push button switch and is not dimmable.

Do I need an electrician to install this?

Yes — this is a hardwired wall fixture and should be connected by a licensed electrician.