Black Backplate Linear Alabaster Sconce

Black Metal Wings · Central Alabaster Strip · Chiseled Tips Extending Past the Frame. Black Backplate Linear Alabaster Sconce features a slender natural alabaster strip framed by sculptural black metal wings for a clean architectural glow.

Black Backplate Linear Alabaster Sconce — Vertical Stone Wall Light

This wall sconce runs a slender alabaster strip up the center of two curved black metal wings, letting the stone's chiseled, angled tips extend just past the metal at both the top and bottom rather than being fully enclosed. Integrated LED lights the alabaster along its full length, so the glow reads as one continuous vertical line rather than a series of separate points. The black metal wings curve slightly forward on either side, framing the lit strip and adding depth and shadow to what would otherwise be a flat panel. It's built from metal and alabaster, and runs on integrated LED at 3000K warm white, up to 60W max, across a 110V–240V voltage range, controlled by a push-button switch (not dimmable). It comes in two sizes, Ø4.8" x H19.7" and Ø4.8" x H29.6", in a White + Black colourway with White, Black finishes and a White alabaster shade. It mounts to the wall for indoor use, suiting a hallway, living room, or stairwell wall, with factory shipment averaging 5–10 days to prepare.

Key Features

• Central alabaster strip lit along its full length by integrated LED
• Chiseled alabaster tips extend past the black metal wings at top and bottom
• Curved black metal wings add depth and shadow around the lit strip
• Available in two heights, so scale can match a shorter accent wall or a taller hallway run
• Electroplated, polished, and cut construction for a refined finish

Specifications

MaterialMetal, AlabasterLight SourceIntegrated LEDKelvin RangeWarm White (3000K)PowerMax 60WVoltageAC 110V – 240VMountingWallEnvironmentIndoorFactory Shipment5–10 days on average to prepareFinishesWhite, BlackAlabaster Shade ColorWhiteProcessElectroplating, Polishing, CuttingControl MethodPush Button Switch (Not Dimmable)Colour / SizeWhite + Black
Kelvin Range: Warm Light
Ø4.8" x H19.7"
Ø4.8" x H29.6"

Where It Works

Available in H19.7" and H29.6" heights, this sconce can sit as a compact accent beside a doorway or stretch taller to anchor a stairwell wall or a long hallway run. Because the alabaster strip is lit along its entire length rather than at a single point, it reads as a continuous line of soft light rather than a conventional bulb-and-shade fixture, and the chiseled tips peeking past the black metal wings add a sculptural detail that changes character depending on the viewing angle. The curved metal wings on either side cast subtle shadow lines alongside the glow, giving the fixture more visual depth than a flat panel light. Since the switch is a simple push-button without dimming, operation is straightforward, though brightness stays fixed once the fixture is powered on. This is a wall-mounted fixture intended for indoor use, so professional installation is recommended.

Size & Dimensions

Downloads

FAQ

What sizes are available?

It comes in two heights: Ø4.8" x H19.7" and Ø4.8" x H29.6", so you can choose the scale that suits the wall.

Does this sconce use replaceable bulbs?

No, it uses integrated LED rather than replaceable bulbs, set at a 3000K warm white output.

Is the alabaster strip genuine stone?

Yes, it's genuine alabaster, so its veining and tone will vary slightly from piece to piece, which is characteristic of natural stone rather than a manufacturing inconsistency.

Can I dim this sconce?

No, it uses a simple push-button switch that is not dimmable, so the light stays at a fixed brightness once powered on.

How long does it take to ship?

Factory shipment averages 5–10 days to prepare before dispatch.