Alabaster Pendant Light – Single-Light Botanical Alabaster Conical Shade Brushed Brass Dining Room Table Fixture Custom

The shade is listed as Spanish alabaster, a natural stone, so every shade has its own pattern of clouds, veins and tone. In the photo, the lit stone is white and cream with soft, cloudy amber and grey veining, and yours will be similar in overall feel but not identical, because the veining will fall in a different place on every shade. Alabaster is translucent, so when the light is on, the stone glows warmer and creamier than it looks when it is off.

There are three finishes, all with a brass body and a white alabaster shade: Brass & White, Black & White and Satin Nickel & White. The photo shows the brass finish, a warm, brushed gold tone that goes well with the cream of the stone. Black gives the strongest contrast, and satin nickel gives a cooler, softer silver tone. Finishes can look slightly different from a screen to your room, so please ask us if an exact match to other fittings matters.

There is one standard size, ⌀ 7.9″ (about 20cm) in diameter and H 19.7″ (about 50cm) tall. In the photo, a tapered stone shade, wider at the bottom, hangs below a pair of curved brass leaves, which rise from a small collar and make the light look like a plant shoot. It is a small pendant, so it suits a bedside, a narrow entryway, a hallway or a corner, and it also looks good hung in a group of two, three or more over a kitchen island, a dining table or a bar. Whether the listed height includes the rod is not listed, so please ask us about the total hanging height.

This pendant takes a replaceable bulb, not a built-in LED. The listing gives the light source as an LED bulb or an Edison bulb, with an E12 base. E12 is the small base common in North America, and many other countries use the E14 base instead, which is not listed, so please check the base before you buy a bulb and tell us your country if you are not sure. How many bulbs it takes, whether a bulb is included and the maximum wattage are not listed, so please ask us before you order. The brightness and the colour of the light come from the bulb, so a warm white bulb gives the creamiest glow through the alabaster. As a general rule, LED bulbs run cooler than Edison bulbs, which is kinder to the stone and the finish.

Dimming is not listed for this pendant, so please ask us before you connect it to a dimmer. If you do use a dimmer, the bulb must be dimmable and must suit the dimmer. The pendant is hardwired, so it is switched from your wall switch, and no other control is listed.

In the photo, the stone shade hangs from a long, straight brass rod under a round, flat ceiling plate. The length of the rod, the total hanging height and whether the rod can be shortened or lengthened are not listed, so please tell us your ceiling height and how low you want it to hang, and ask us before you order. If you hang several together, tell us if you want them at different heights.

Yes, the pendant is listed as sloped ceiling compatible. How steep the slope can be, and how the ceiling plate fits a slope, are not listed, so please tell us the angle of your ceiling and ask us before you order. Any installation on a sloped ceiling should be done by a qualified electrician.

The pendant is hardwired, which means it is connected directly to your ceiling wiring, so it should be fitted by a qualified electrician who follows your local rules. The ceiling fixing point must be able to carry the stone shade and the brass rod. The voltage and the weight are not listed, and the right bulb base depends on your country, so please tell us your country and ask us before you order.

Switch off the power and let the bulb cool first. Dust the stone with a soft, dry cloth or brush, handling it gently, because stone can chip if it is knocked. Alabaster is a soft stone that scratches and stains easily and reacts to acids, so avoid water, vinegar, lemon, glass cleaner and abrasive pads. Wipe the metal rod and the leaves with a dry soft cloth, taking care with the thin leaf tips, and avoid abrasive cleaners and metal polishes, which can mark the finish. No water-protection rating is listed, so keep it to dry indoor rooms and away from showers, sinks and damp spaces. Over a kitchen island, keep it clear of steam and grease.

Yes. The standard pendant comes in Brass & White, Black & White or Satin Nickel & White, with a white alabaster shade. We also offer other metal body colours and finishes upon request. Contact our team with your preferred colour, finish or reference image. We will confirm the available options, pricing and production lead time before your order is placed.

Yes. The standard size is ⌀ 7.9″ × H 19.7″ (approx. 20 × 50 cm). Custom sizes can be requested to suit your space and design requirements, and the rod can be made longer or shorter for your ceiling height, subject to technical feasibility. Please provide your preferred dimensions so our team can review technical feasibility and confirm the custom quotation and production time.

Absolutely. The standard version in Brass & White, Black & White or Satin Nickel & White can be purchased directly through our online store, subject to availability. Customization is optional and is only needed if you require a different metal body finish or dimensions.

Please contact us with your preferred body colour or finish, custom dimensions and any relevant design references. Our team will review your requirements and provide a quotation with the estimated production lead time. Once the specifications and price are confirmed, we will guide you through the custom ordering process.