Split Alabaster Seed Sconce

Split Leaf Alabaster Wall Sconce with Leather Accent — Curved Panel Light for Living Room, Hallway or Bedroom

This wall sconce splits a leaf-shaped alabaster silhouette down the middle into two curved halves, joined at the center by a slim black metal bar wrapped in leather, so the fixture reads as a single form gently parted rather than two separate shades placed side by side. It's built from Metal, Alabaster, and Leather, with Black body finishes and a White shade finish, in a Black & White colourway, and runs on an integrated LED at Warm Light (3000K) only. It's wired for AC 110-240V, hardwired to the wall for indoor use, and rated IP20 (damp-rated, not waterproof, indoor use only). It's compatible with a common external wall switch (not included), which must be connected to the fixture to control power. It comes in two sizes — Dia 7.3" x H14.2" or Dia 9.1" x H20.5" — and carries certification for use in North America, Saudi Arabia, Europe, and Australia. The split-leaf silhouette suits a modern organic, contemporary, or transitional living room, hallway, or bedroom.

Key Features

• Leaf-shaped alabaster silhouette split into two curved halves
• Slim black metal center bar wrapped in leather joins the two halves
• Integrated LED at Warm Light (3000K) only
• Hardwired wall mount; compatible with a common external wall switch (not included)
• Wired for AC 110-240V; IP20 rated, indoor use only
• Available in two sizes: Dia 7.3" x H14.2" or Dia 9.1" x H20.5"

Specifications

Where It Works

Choose the smaller 7.3" x 14.2" size for a compact accent beside a bed or mirror, or the larger 9.1" x 20.5" size where a bigger wall space calls for more visual presence, such as flanking a fireplace or sofa in the living room. Because the LED is integrated at Warm Light (3000K) and diffused through both alabaster halves, the light emerges from the split down the center as much as from the surface, giving the fixture a soft inner glow along its seam. This fixture is hardwired and compatible with a common external wall switch (not included), which must be connected to control power — confirm this before installation. Note that it's rated IP20 (damp-rated, not waterproof), so it should be used indoors only, away from direct moisture. Each alabaster half is individually cut and polished from natural stone, so expect gentle variation in veining and translucency between pieces. It's wired for AC 110-240V and carries certification for use in North America, Saudi Arabia, Europe, and Australia, though local wiring codes should still be confirmed before installation.

Size & Dimensions

Downloads

FAQ